Installing Vinyl Over Vinyl Sheets

Vinyl tiles are an easy and affordable way of giving a room a totally new look. They are easier to install than vinyl sheets, and if you are not very experienced at DIY they are definitely the best option. But if you already have a vinyl floor, a common concern is whether installing vinyl over vinyl sheets is possible. In most cases, installing over sheet vinyl is possible, but you will need to prepare the floor correctly.

Is The Old Floor Lifting Up?

First of all you will need to check out the conservation status of your existing vinyl flooring. The most important thing to look at is whether it’s perfectly bonded to the subfloor. Old vinyl flooring in need of maintenance often shows signs of lifting from the subfloor, and will need some vinyl flooring repair in order to install vinyl tiles on top.  Use vinyl flooring glue and wait a few days to see if the old vinyl flooring lifts again. If it does, removing vinyl floor with a knife may be easier than installing over vinyl flooring that is in such bad shape.

Are There Marks Or Deep Scratches?

If the existing vinyl flooring has cuts, holes or deep scratches, those imperfections will make installing vinyl over vinyl difficult and will need to be fixed before continuing. If there is a lot of damage you may be better off removing the old floor and preparing the subfloor for laying vinyl floor directly on top of it. If the imperfections are minor, you can fix them using a self-levelling embossing solution to fill the holes, and make sure the entire floor is perfectly flat.

Installing Vinyl Tile Over Existing Vinyl Floor

In order to install your new vinyl luxury tile you will need the floor to be perfectly clean and flat. Start with using a good floor cleaning liquid, but avoid those that have wax or give a glossy finish. Use a clean mop, and change the water as soon as it gets dirty. You need a really spotless surface for the self adhesive vinyl tiles to stick properly. Dry the floor using towels, and make sure there is no soap residue at all. Leave the floor to dry (and make sure you don’t step on it with dirty feet) and apply a coat of vinyl primer on the vinyl sheeting to improve the adhesive effects. Once the primer is dry it’s time to lay your new vinyl flooring on top of the old one.

If you are using vinyl tile squares it’s better to start in the middle of the room and move outwards towards the walls, so if you need to cut any tile it’s only one that is close to the wall. Be careful when cutting vinyl flooring over existing vinyl, as you could make a hole that would need to be fixed before you can install the tiles. Depending on the size of the room, this work can take less than a day. Just make sure you are very careful and align each tile perfectly with the ones next to it so the effect is of a professional vinyl tile installation over your old vinyl sheet flooring.